+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6213 ZN: ⌀65 × ⌀120 × 23 mm⌀120⌀65236213 ZNZN
Fig. 1: 6213 ZN, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6213 ZN

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6213 ZN

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 32 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
23 mm
Width BRing width. Source: supplier data
Seal
ZNshield on one side
Clearance
normal clearance
C
58.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
40.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.99 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 65 × 120 × 23 from other brands

33 products
Cross-section drawing to size: Deep groove ball, 65 × 120 × 23 mm
You are viewingCT 6213 ZN

Same size, different design: the difference is written in the row.

  • Photo: 62136213open, no protectionSKF65 × 120 × 235 pcs€27.99Request a quote
  • Series illustration (not a photo of this item): 62136213open, no protectionCT65 × 120 × 23available to order€2.64Request a quote
  • Series illustration (not a photo of this item): 62136213open, no protectionno brand65 × 120 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6213 N6213 Nopen, no protection, groove for a snap ringCT65 × 120 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62136213open, no protectionDYZV65 × 120 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6213/C36213/C3open, no protection, clearance C3DYZV65 × 120 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62136213open, no protectionFLT65 × 120 × 23out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 62136213open, no protectionGPZ65 × 120 × 23out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 62136213open, no protectionKG65 × 120 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6213 C36213 C3open, no protection, clearance C3SKF65 × 120 × 23available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 120d 65B 23
d×D×Bsize 65 × 120 × 23mm
Cdynamic 58.5kN
C0static 40.5kN
mweight 0.99kg

Deep groove ball bearing 6213-Z, design ZN: shield on one side. Under GOST the same bearing is designated 60213.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 60213?

It is the same bearing under GOST 3189-89: 6 — shield on one side, 0213 corresponds to the ISO base 6213. Size 65 × 120 × 23 mm, a full equivalent of 6213-Z.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet