+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6206 Z: ⌀30 × ⌀62 × 16 mm⌀62⌀30166206 ZZ
Fig. 1: 6206 Z, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6206 Z

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6206 Z

€0.76per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 88 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
Zshield, one side
Clearance
normal clearance
C
20.3 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
11.2 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.2 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 62 × 16 from other brands

91 products
Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm
You are viewingCT 6206 Z
€0.76baseline for the price comparison

Everything the number specifies matches: series 62, 30 × 62 × 16 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm6206 ZThis bearingCT30 × 62 × 16available to order€0.76you are here
  • Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm6206 ZKG30 × 62 × 16available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€0.76).
02

Details

what this bearing is, questions

About the bearing

D 62d 30B 16
d×D×Bsize 30 × 62 × 16mm
Cdynamic 20.3kN
C0static 11.2kN
mweight 0.2kg

Deep groove ball bearing 6206-Z, design Z: shield on one side. Under GOST the same bearing is designated 60206.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 60206?

It is the same bearing under GOST 3189-89: 6 — shield on one side, 0206 corresponds to the ISO base 6206. Size 30 × 62 × 16 mm, a full equivalent of 6206-Z.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet