+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6205 N: ⌀25 × ⌀52 × 15 mm⌀52⌀25156205 N
Fig. 1: 6205 N, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6205 N

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6205 N

€2.91per piece
In stock: 99 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 82 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
14.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
7.8 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.13 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 52 × 15 from other brands

83 products
Series illustration (not a photo of this item): 6205 N
You are viewingCT 6205 N
€2.91baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Deep groove ball, 25 × 52 × 15 mm6205 Zshield on one side, standard designCT25 × 52 × 15285 pcs€0.49−€2.42Request a quote
  • Series illustration (not a photo of this item): 6205 ZZ6205 ZZmetal shields on both sides, standard designCT25 × 52 × 1528,610 pcs€0.53−€2.38Request a quote
  • Series illustration (not a photo of this item): 6205 ZZ C36205 ZZ C3metal shields on both sides, clearance C3, standard designCT25 × 52 × 152,067 pcs€0.65−€2.26Request a quote
  • Series illustration (not a photo of this item): 6205 ZZ6205 ZZmetal shields on both sides, standard designNTE25 × 52 × 15940 pcs€0.78−€2.13Request a quote
  • Series illustration (not a photo of this item): 6205 ZZ C36205 ZZ C3metal shields on both sides, clearance C3, standard designKoyo25 × 52 × 15100 pcs€3.27+€0.36Request a quote
  • Series illustration (not a photo of this item): 6205 ZZCM6205 ZZCMmetal shields on both sides, clearance CM, standard designKoyo25 × 52 × 1525 pcs€3.27+€0.36Request a quote
  • Photo: 6205 2Z6205 2Zmetal shields on both sides, standard designSKF25 × 52 × 151,136 pcs€3.27+€0.36Request a quote
  • Photo: 6205 ZZ6205 ZZmetal shields on both sides, standard designWBW25 × 52 × 15available to order€1.28−€1.63Request a quote
  • Photo: 6205 ZZ C36205 ZZ C3metal shields on both sides, clearance C3, standard designZ&S25 × 52 × 15available to order€1.80−€1.11Request a quote
  • Photo: 6205-2Z/C36205-2Z/C3metal shields on both sides, clearance C3, standard designSKF25 × 52 × 15available to order€2.92+€0.01Request a quote

Under the price: the difference from the price of this bearing (€2.91).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 15
d×D×Bsize 25 × 52 × 15mm
Cdynamic 14.8kN
C0static 7.8kN
mweight 0.13kg

Deep groove ball bearing 6205. Under GOST the same bearing is designated 205.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 205?

It is the same bearing under GOST 3189-89: 205 corresponds to the ISO base 6205. Size 25 × 52 × 15 mm, a full equivalent of 6205.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet