+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 605 ZZ: ⌀5 × ⌀14 × 5 mm605 ZZZZ
Fig. 1: 605 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 605 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 605 ZZ

€0.17per piece
In stock: 6,990 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 0 approximate
d
5 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
14 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
5 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
normal clearance
01

Equivalents

the same size 5 × 14 × 5 from other brands

2 products
Series illustration (not a photo of this item): 605 ZZ
You are viewingCT 605 ZZ
€0.17baseline for the price comparison

Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 605 ZZ605 ZZThis bearingCT5 × 14 × 56,990 pcs€0.17you are here
  • Series illustration (not a photo of this item): 605 ZZ605 ZZKG5 × 14 × 5available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€0.17).
02

Details

what this bearing is, questions

About the bearing

D 14d 5B 5
d×D×Bsize 5 × 14 × 5mm

Deep groove ball bearing 605-ZZ, design ZZ: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet