+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6034: ⌀170 × ⌀260 × 42 mm6034
Fig. 1: 6034, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6034

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6034

€23.93per piece
In stock: 6 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 4 approximate
d
170 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
260 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
42 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
168 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 170 × 260 × 42 from other brands

9 products
Series illustration (not a photo of this item): 6034
You are viewingCT 6034
€23.93baseline for the price comparison

Everything the number specifies matches: series 60, 170 × 260 × 42 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 60346034This bearingCT170 × 260 × 426 pcs€23.93you are here
  • Series illustration (not a photo of this item): 60346034KG170 × 260 × 42available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€23.93).
02

Details

what this bearing is, questions

About the bearing

D 260d 170B 42
d×D×Bsize 170 × 260 × 42mm
Cdynamic 168kN

Deep groove ball bearing 6034. Under GOST the same bearing is designated 134.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 134?

It is the same bearing under GOST 3189-89: 134 corresponds to the ISO base 6034. Size 170 × 260 × 42 mm, a full equivalent of 6034.

Will 6034 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet