+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6019 ZZ: ⌀95 × ⌀145 × 24 mm6019 ZZZZ
Fig. 1: 6019 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6019 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6019 ZZ

€4.67per piece
In stock: 155 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 13 approximate
d
95 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
145 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
24 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
normal clearance
C
63.7 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
54 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
1.2 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 95 × 145 × 24 from other brands

15 products
Series illustration (not a photo of this item): 6019 ZZ
You are viewingCT 6019 ZZ
€4.67baseline for the price comparison

Everything the number specifies matches: series 60, 95 × 145 × 24 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 6019 ZZ6019 ZZThis bearingCT95 × 145 × 24155 pcs€4.67you are here
  • Series illustration (not a photo of this item): 6019 2Z6019 2ZSKF95 × 145 × 24available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€4.67).
02

Details

what this bearing is, questions

About the bearing

D 145d 95B 24
d×D×Bsize 95 × 145 × 24mm
Cdynamic 63.7kN
C0static 54kN
mweight 1.2kg

Deep groove ball bearing 6019-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80119.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80119?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0119 corresponds to the ISO base 6019. Size 95 × 145 × 24 mm, a full equivalent of 6019-ZZ.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet