+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6010: ⌀50 × ⌀80 × 16 mm6010
Fig. 1: 6010, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6010

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6010

€1.38per piece
In stock: 296 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 29 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
22.9 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
m
0.26 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 80 × 16 from other brands

34 products
Series illustration (not a photo of this item): 6010
You are viewingCT 6010
€1.38baseline for the price comparison

Everything the number specifies matches: series 60, 50 × 80 × 16 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 60106010This bearingCT50 × 80 × 16296 pcs€1.38you are here
  • Photo: 60106010SKF50 × 80 × 16available to order€7.75+€6.37Request a quote
  • Series illustration (not a photo of this item): 60106010KG50 × 80 × 16available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60106010NTE50 × 80 × 16available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€1.38).
02

Details

what this bearing is, questions

About the bearing

D 80d 50B 16
d×D×Bsize 50 × 80 × 16mm
Cdynamic 22.9kN
mweight 0.26kg

Deep groove ball bearing 6010. Under GOST the same bearing is designated 110.

C, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 110?

It is the same bearing under GOST 3189-89: 110 corresponds to the ISO base 6010. Size 50 × 80 × 16 mm, a full equivalent of 6010.

Will 6010 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet