+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6009: ⌀45 × ⌀75 × 16 mm6009
Fig. 1: 6009, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6009

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6009

€0.84per piece
In stock: 971 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 44 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
75 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
22.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
14.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 75 × 16 from other brands

48 products
Series illustration (not a photo of this item): 6009
You are viewingCT 6009
€0.84baseline for the price comparison

Everything the number specifies matches: series 60, 45 × 75 × 16 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 60096009This bearingCT45 × 75 × 16971 pcs€0.84you are here
  • Photo: 60096009ZKL45 × 75 × 16available to order€6.17+€5.33Request a quote
  • Photo: 60096009SKF45 × 75 × 16available to order€6.62+€5.78Request a quote
  • Series illustration (not a photo of this item): 60096009KG45 × 75 × 16available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€0.84).
02

Details

what this bearing is, questions

About the bearing

D 75d 45B 16
d×D×Bsize 45 × 75 × 16mm
Cdynamic 22.1kN
C0static 14.6kN
mweight 0.25kg

Deep groove ball bearing 6009. Under GOST the same bearing is designated 109.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 109?

It is the same bearing under GOST 3189-89: 109 corresponds to the ISO base 6009. Size 45 × 75 × 16 mm, a full equivalent of 6009.

Will 6009 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet