+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 4204 2RS: ⌀20 × ⌀47 × 18 mm⌀47⌀20184204 2RS2RS
Fig. 1: 4204 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 4204 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 4204 2RS

€1.57per piece
In stock: 583 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 14 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
18 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
C
17.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
12.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.14 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 20 × 47 × 18 from other brands

18 products
Cross-section drawing to size: Deep groove ball, 20 × 47 × 18 mm
You are viewingCT 4204 2RS
€1.57baseline for the price comparison

Everything the number specifies matches: series 42, 20 × 47 × 18 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Deep groove ball, 20 × 47 × 18 mm4204 2RSThis bearingCT20 × 47 × 18583 pcs€1.57you are here
  • Photo: 4204 2RS4204 2RSZ&S20 × 47 × 18available to order€4.59+€3.02Request a quote
  • Cross-section drawing to size: Deep groove ball, 20 × 47 × 18 mm4204 2RSno brand20 × 47 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 20 × 47 × 18 mm4204 2RSZEN20 × 47 × 18available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€1.57).
02

Details

what this bearing is, questions

About the bearing

D 47d 20B 18
d×D×Bsize 20 × 47 × 18mm
Cdynamic 17.8kN
C0static 12.5kN
mweight 0.14kg

Deep groove ball bearing 4204-2RS, design 2RS: contact seals on both sides.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 4204 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet