+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 33014 single box: ⌀70 × ⌀110 × 31 mm⌀110⌀70B 31T 31C 25.5α33014 single box
Fig. 1: 33014 single box, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 33014

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing CT 33014

€4.29per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 1 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: supplier data
T
31 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
Cup width C
25.5 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
01

Equivalents

the same size 70 × 110 × 31 from other brands

6 products
Series illustration (not a photo of this item): 33014 single box
You are viewingCT 33014
€4.29baseline for the price comparison

Everything the number specifies matches: series 330, 70 × 110 × 31 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 33014 single box33014 single boxThis bearingCT70 × 110 × 31available to order€4.29you are here
  • Series illustration (not a photo of this item): 3301433014CT70 × 110 × 311 pcs€4.52+€0.23Request a quote
  • Series illustration (not a photo of this item): 3301433014no brand70 × 110 × 31available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€4.29).
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 70 × 110 × 31mm

Tapered roller bearing 33014. Under GOST the same bearing is designated 3007114.

Frequently asked questions

What is 3007114?

It is the same bearing under GOST 3189-89: 3007114 corresponds to the ISO base 33014. Size 70 × 110 × 31 mm, a full equivalent of 33014.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet