+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 3205 ZZ: ⌀25 × ⌀52 × 20.6 mm⌀52⌀2520.63205 ZZZZ
Fig. 1: 3205 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3205 ZZ

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing CT 3205 ZZ

€1.51per piece
In stock: 3 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 32 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20.6 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
C
21.6 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
14.3 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.19 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 52 × 20.6 from other brands

38 products
Cross-section drawing to size: Angular contact ball, 25 × 52 × 20.6 mm
You are viewingCT 3205 ZZ
€1.51baseline for the price comparison

Everything the number specifies matches: series 32, 25 × 52 × 20.6 mm, metal shields on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Angular contact ball, 25 × 52 × 20.6 mm3205 ZZThis bearingCT25 × 52 × 20.63 pcs€1.51you are here
  • Cross-section drawing to size: Angular contact ball, 25 × 52 × 20.6 mm3205 ZZKG25 × 52 × 20.6available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 25 × 52 × 20.6 mm3205 ZZMTM25 × 52 × 20.6available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€1.51).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 20.6
d×D×Bsize 25 × 52 × 20.6mm
Cdynamic 21.6kN
C0static 14.3kN
mweight 0.19kg

Angular contact ball bearing 3205-ZZ, design ZZ: metal shields on both sides.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet