+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 23130 MBW33: ⌀150 × ⌀250 × 80 mm⌀250⌀1508023130 MBW33
Fig. 1: 23130 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23130 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 23130 MBW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 5 approximate
d
150 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
250 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
80 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 150 × 250 × 80 from other brands

6 products
Cross-section drawing to size: Spherical roller, 150 × 250 × 80 mm
You are viewingCT 23130 MBW33

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 150 × 250 × 80 mm23130 CAW33CA, lubrication groove and holesNTE150 × 250 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 250 × 80 mm23130 CW33CW33NTE150 × 250 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 250 × 80 mm23130 CC/W33lubrication groove and holes, pressed cageSKF150 × 250 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 250 × 80 mm23130 CCK/W33lubrication groove and holes, pressed cage, 1:12 tapered boreSKF150 × 250 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 250 × 80 mm23130 MBW33C3clearance C3KG150 × 250 × 80available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 150 × 250 × 80mm

Spherical roller bearing 23130.

Frequently asked questions

Will 23130 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet