+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 23036 MBW33: ⌀180 × ⌀280 × 74 mm⌀280⌀1807423036 MBW33
Fig. 1: 23036 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23036 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 23036 MBW33

€76.80per piece
In stock: 9 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 3 approximate
d
180 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
280 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
74 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
710 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 180 × 280 × 74 from other brands

6 products
Cross-section drawing to size: Spherical roller, 180 × 280 × 74 mm
You are viewingCT 23036 MBW33
€76.80baseline for the price comparison

Everything the number specifies matches: series 230, 180 × 280 × 74 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 180 × 280 × 74 mm23036 MBW33This bearingCT180 × 280 × 749 pcs€76.80you are here
  • Cross-section drawing to size: Spherical roller, 180 × 280 × 74 mm23036 MBW33NTE180 × 280 × 74available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€76.80).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 180 × 280 × 74mm
Cdynamic 710kN

Spherical roller bearing 23036. Under GOST the same bearing is designated 3003136.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3003136?

It is the same bearing under GOST 3189-89: 3003136 corresponds to the ISO base 23036. Size 180 × 280 × 74 mm, a full equivalent of 23036.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet