+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 23034 MBW33: ⌀170 × ⌀260 × 67 mm⌀260⌀1706723034 MBW33
Fig. 1: 23034 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23034 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 23034 MBW33

€58.77per piece
In stock: 10 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 4 approximate
d
170 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
260 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
67 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
608 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 170 × 260 × 67 from other brands

7 products
Cross-section drawing to size: Spherical roller, 170 × 260 × 67 mm
You are viewingCT 23034 MBW33
€58.77baseline for the price comparison

Everything the number specifies matches: series 230, 170 × 260 × 67 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 170 × 260 × 67 mm23034 MBW33This bearingCT170 × 260 × 6710 pcs€58.77you are here
  • Cross-section drawing to size: Spherical roller, 170 × 260 × 67 mm23034 MBW33NTE170 × 260 × 67available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€58.77).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 170 × 260 × 67mm
Cdynamic 608kN

Spherical roller bearing 23034.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet