+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22326 CAW33: ⌀130 × ⌀280 × 93 mm⌀280⌀1309322326 CAW33
Fig. 1: 22326 CAW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22326 CAW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22326 CAW33

€110.29per piece
In stock: 160 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 16 approximate
d
130 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
280 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
93 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
942 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 130 × 280 × 93 from other brands

19 products
Cross-section drawing to size: Spherical roller, 130 × 280 × 93 mm
You are viewingCT 22326 CAW33
€110.29baseline for the price comparison

Everything the number specifies matches: series 223, 130 × 280 × 93 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 130 × 280 × 93 mm22326 CAW33This bearingCT130 × 280 × 93160 pcs€110.29you are here
  • Cross-section drawing to size: Spherical roller, 130 × 280 × 93 mm22326 CAW33NTE130 × 280 × 936 pcs€182.58+€72.29Request a quote

Under the price: the difference from the price of this bearing (€110.29).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 130 × 280 × 93mm
Cdynamic 942kN

Spherical roller bearing 22326. Under GOST the same bearing is designated 3626K.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3626K?

It is the same bearing under GOST 3189-89: 3626K corresponds to the ISO base 22326. Size 130 × 280 × 93 mm, a full equivalent of 22326.

Will 22326 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet