+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22318 CA/W33: ⌀90 × ⌀190 × 64 mm⌀190⌀906422318 CA/W33
Fig. 1: 22318 CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22318 CA/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22318 CA/W33

€44.77per piece
In stock: 42 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 27 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
190 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
64 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
475 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 90 × 190 × 64 from other brands

29 products
Cross-section drawing to size: Spherical roller, 90 × 190 × 64 mm
You are viewingCT 22318 CA/W33
€44.77baseline for the price comparison

Everything the number specifies matches: series 223, 90 × 190 × 64 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 90 × 190 × 64 mm22318 CA/W33This bearingCT90 × 190 × 6442 pcs€44.77you are here
  • Cross-section drawing to size: Spherical roller, 90 × 190 × 64 mm22318 CAW33NTE90 × 190 × 64available to order€65.65+€20.88Request a quote

Under the price: the difference from the price of this bearing (€44.77).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 190 × 64mm
Cdynamic 475kN

Spherical roller bearing 22318. Under GOST the same bearing is designated 53618.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 53618?

It is the same bearing under GOST 3189-89: 53618 corresponds to the ISO base 22318. Size 90 × 190 × 64 mm, a full equivalent of 22318.

Will 22318 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet