+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22311 CA/W33 single box: ⌀55 × ⌀120 × 43 mm⌀120⌀554322311 CA/W33 single box
Fig. 1: 22311 CA/W33 single box, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22311 CA/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22311 CA/W33

€11.82per piece
In stock: 100 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 24 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
43 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 55 × 120 × 43 from other brands

28 products
Cross-section drawing to size: Spherical roller, 55 × 120 × 43 mm
You are viewingCT 22311 CA/W33
€11.82baseline for the price comparison

Everything the number specifies matches: series 223, 55 × 120 × 43 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 55 × 120 × 43 mm22311 CA/W33 single boxThis bearingCT55 × 120 × 43100 pcs€11.82you are here
  • Cross-section drawing to size: Spherical roller, 55 × 120 × 43 mm22311 CA/W33CT55 × 120 × 4353 pcs€12.89+€1.07Request a quote
  • Cross-section drawing to size: Spherical roller, 55 × 120 × 43 mm22311 CAW33NTE55 × 120 × 438 pcs€20.52+€8.70Request a quote

Under the price: the difference from the price of this bearing (€11.82).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 120 × 43mm

Spherical roller bearing 22311. Under GOST the same bearing is designated 53611.

Frequently asked questions

What is 53611?

It is the same bearing under GOST 3189-89: 53611 corresponds to the ISO base 22311. Size 55 × 120 × 43 mm, a full equivalent of 22311.

Will 22311 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet