+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22232 CA/W33: ⌀160 × ⌀290 × 80 mm⌀290⌀1608022232 CA/W33
Fig. 1: 22232 CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22232 CA/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22232 CA/W33

€102.96per piece
In stock: 48 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 11 approximate
d
160 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
290 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
80 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
825 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 160 × 290 × 80 from other brands

12 products
Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm
You are viewingCT 22232 CA/W33
€102.96baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Type diagram, no dimensions: spherical22232 CW33 PQCW33, PQ: not decodedNTE160 × 290 × ?10 pcs€222.57+€119.61Request a quote
  • Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm22232 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT160 × 290 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm22232MB/W33MB, lubrication groove and holesDYZV160 × 290 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm22232 E1-XLE1, XLFAG160 × 290 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm22232 MBW33MB, lubrication groove and holesKG160 × 290 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm22232 MBW33C3clearance C3, MB, lubrication groove and holesKG160 × 290 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm22232 ACKMBW33AC, MB, lubrication groove and holes, 1:12 tapered boreNTE160 × 290 × 80available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22232 CW3322232 CW33CW33NTE160 × 290 × 80available to orderon requestRequest a quote
  • Type diagram, no dimensions: spherical22232 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE160 × 290 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 290 × 80 mm22232 CC/W33lubrication groove and holes, pressed cageSKF160 × 290 × 80available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€102.96).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 160 × 290 × 80mm
Cdynamic 825kN

Spherical roller bearing 22232. Under GOST the same bearing is designated 3532.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3532?

It is the same bearing under GOST 3189-89: 3532 corresponds to the ISO base 22232. Size 160 × 290 × 80 mm, a full equivalent of 22232.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet