+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22230 CA/W33: ⌀150 × ⌀270 × 73 mm⌀270⌀1507322230 CA/W33
Fig. 1: 22230 CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22230 CA/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22230 CA/W33

€81.71per piece
In stock: 16 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 16 approximate
d
150 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
270 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
73 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 150 × 270 × 73 from other brands

18 products
Cross-section drawing to size: Spherical roller, 150 × 270 × 73 mm
You are viewingCT 22230 CA/W33
€81.71baseline for the price comparison

Everything the number specifies matches: series 222, 150 × 270 × 73 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 150 × 270 × 73 mm22230 CA/W33This bearingCT150 × 270 × 7316 pcs€81.71you are here
  • Cross-section drawing to size: Spherical roller, 150 × 270 × 73 mm22230 CAW33NTE150 × 270 × 735 pcs€127.18+€45.47Request a quote

Under the price: the difference from the price of this bearing (€81.71).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 150 × 270 × 73mm

Spherical roller bearing 22230. Under GOST the same bearing is designated 3530.

Frequently asked questions

What is 3530?

It is the same bearing under GOST 3189-89: 3530 corresponds to the ISO base 22230. Size 150 × 270 × 73 mm, a full equivalent of 22230.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet