+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 21308 CW33: ⌀40 × ⌀90 × 23 mm⌀90⌀402321308 CW33
Fig. 1: 21308 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 21308 CW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 21308 CW33

€5.67per piece
In stock: 93 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 2 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 40 × 90 × 23 from other brands

5 products
Cross-section drawing to size: Spherical roller, 40 × 90 × 23 mm
You are viewingCT 21308 CW33
€5.67baseline for the price comparison

Everything the number specifies matches: series 213, 40 × 90 × 23 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 40 × 90 × 23 mm21308 CW33This bearingCT40 × 90 × 2393 pcs€5.67you are here
  • Cross-section drawing to size: Spherical roller, 40 × 90 × 23 mm21308 CW33no brand40 × 90 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 40 × 90 × 23 mm21308 CW33URB40 × 90 × 23available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€5.67).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 90 × 23mm

Spherical roller bearing 21308.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet