+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 21307 CW33: ⌀35 × ⌀80 × 21 mm⌀80⌀352121307 CW33
Fig. 1: 21307 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 21307 CW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 21307 CW33

€5.62per piece
In stock: 19 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 2 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
21 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 35 × 80 × 21 from other brands

4 products
Cross-section drawing to size: Spherical roller, 35 × 80 × 21 mm
You are viewingCT 21307 CW33
€5.62baseline for the price comparison

Everything the number specifies matches: series 213, 35 × 80 × 21 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 35 × 80 × 21 mm21307 CW33This bearingCT35 × 80 × 2119 pcs€5.62you are here
  • Cross-section drawing to size: Spherical roller, 35 × 80 × 21 mm21307 CW33no brand35 × 80 × 21available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€5.62).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 80 × 21mm

Spherical roller bearing 21307.

Frequently asked questions

Will 21307 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet