+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 16020: ⌀100 × ⌀150 × 16 mm16020
Fig. 1: 16020, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16020

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 16020

€7.37per piece
In stock: 12 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
1 exact, 1 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
46.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
44 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.91 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 100 × 150 × 16 from other brands

2 products
Series illustration (not a photo of this item): 16020
You are viewingCT 16020
€7.37baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€7.37).
02

Details

what this bearing is, questions

About the bearing

D 150d 100B 16
d×D×Bsize 100 × 150 × 16mm
Cdynamic 46.2kN
C0static 44kN
mweight 0.91kg

Deep groove ball bearing 16020. Under GOST the same bearing is designated 7000120.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7000120?

It is the same bearing under GOST 3189-89: 7000120 corresponds to the ISO base 16020. Size 100 × 150 × 16 mm, a full equivalent of 16020.

Will 16020 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet