+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 16015: ⌀75 × ⌀115 × 13 mm16015
Fig. 1: 16015, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16015

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 16015

€3.21per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 0 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
115 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
13 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
30.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
27 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.46 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 75 × 115 × 13 from other brands

2 products
Series illustration (not a photo of this item): 16015
You are viewingCT 16015
€3.21baseline for the price comparison

Everything the number specifies matches: series 160, 75 × 115 × 13 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 1601516015This bearingCT75 × 115 × 13available to order€3.21you are here
  • Series illustration (not a photo of this item): 1601516015FAG75 × 115 × 13out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€3.21).
02

Details

what this bearing is, questions

About the bearing

D 115d 75B 13
d×D×Bsize 75 × 115 × 13mm
Cdynamic 30.2kN
C0static 27kN
mweight 0.46kg

Deep groove ball bearing 16015. Under GOST the same bearing is designated 7000115.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7000115?

It is the same bearing under GOST 3189-89: 7000115 corresponds to the ISO base 16015. Size 75 × 115 × 13 mm, a full equivalent of 16015.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet