+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 1509 (2209): ⌀45 × ⌀85 × 23 mm⌀85⌀45231509 (2209)
Fig. 1: 1509 (2209), simplified drawing per ISO 8826-1; GOST number = ISO 2209, dimensions from the GOST↔ISO table CX p.763. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1509

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 1509

Supplier’s set and note: (2209)

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 17 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
85 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
23 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 45 × 85 × 23 from other brands

19 products
Cross-section drawing to size: Deep groove ball, 45 × 85 × 23 mm
You are viewingCT 1509

Everything the number specifies matches: series 15, 45 × 85 × 23 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.
02

Details

what this bearing is, questions

About the bearing

D 85d 45B 23
d×D×Bsize 45 × 85 × 23mm

Deep groove ball bearing 2209. Under GOST the same bearing is designated 1509.

Frequently asked questions

What is 1509?

It is the same bearing under GOST 3189-89: 1509 corresponds to the ISO base 2209. Size 45 × 85 × 23 mm, a full equivalent of 2209.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet