+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 1000915: ⌀75 × ⌀105 × 16 mm⌀105⌀75161000915
Fig. 1: 1000915, simplified drawing per ISO 8826-1; GOST number = ISO 61915, dimensions from the GOST↔ISO table CX p.758. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1000915

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 1000915

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 8 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
105 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
16 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 75 × 105 × 16 from other brands

10 products
Cross-section drawing to size: Deep groove ball, 75 × 105 × 16 mm
You are viewingCT 1000915

Everything the number specifies matches: series 10009, 75 × 105 × 16 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.
02

Details

what this bearing is, questions

About the bearing

D 105d 75B 16
d×D×Bsize 75 × 105 × 16mm

Deep groove ball bearing 1000915.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet