+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
BECO
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6306-BHTS-ZZ-C4 (220°C-250°C): ⌀30 × ⌀72 mm⌀72⌀306306-BHTS-ZZ-C4 (220°C-250°C)ZZ
Fig. 1: 6306-BHTS-ZZ-C4 (220°C-250°C), simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6306-BHTS-ZZ-C4

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing BECO 6306-BHTS-ZZ-C4

Supplier’s set and note: (220°C-250°C)

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 79 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
Seal
ZZshields, both sides
Clearance
C4
01

Equivalents

the same size 30 × 72 from other brands

81 products
Type diagram, no dimensions: ball
You are viewingBECO 6306-BHTS-ZZ-C4

Everything the number specifies matches: series 63, 30 × 72 mm, metal shields on both sides, clearance C4, special design. The codes in the number are read against the BECO catalogue.

  • Type diagram, no dimensions: ball6306-BHTS-ZZ-C4 (220°C-250°C)This bearingBECO30 × 72 × ?available to orderon requestyou are here
  • Type diagram, no dimensions: ball6306 BHTS ZZ C4 200°BECO30 × 72 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 72mm

Deep groove ball bearing 6306-ZZ C4, design ZZ: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet