+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
AKE
Drawing of 33205 A: ⌀25 × ⌀52 × 22 mm⌀52⌀25B 22T 22C 18α33205 A
Fig. 1: 33205 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 33205 A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing AKE 33205 A

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 8 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
22 mm
Width BRing width. Source: supplier data
T
22 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
Cup width C
18 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
01

Equivalents

the same size 25 × 52 × 22 from other brands

10 products
Series illustration (not a photo of this item): 33205 A
You are viewingAKE 33205 A

Everything the number specifies matches: series 332, 25 × 52 × 22 mm, special design. The codes in the number are read against the AKE catalogue.

  • Series illustration (not a photo of this item): 33205 A33205 AThis bearingAKE25 × 52 × 22available to orderon requestyou are here
  • Photo: 33205 A33205 AZ&S25 × 52 × 22out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 25 × 52 × 22mm

Tapered roller bearing 33205. Under GOST the same bearing is designated 3007205.

Frequently asked questions

What is 3007205?

It is the same bearing under GOST 3189-89: 3007205 corresponds to the ISO base 33205. Size 25 × 52 × 22 mm, a full equivalent of 33205.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet