+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6410: ⌀50 × ⌀130 × 31 mm6410
Fig. 1: 6410, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6410

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing 6410

€8.54per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 3 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 50 × 130 × 31 from other brands

8 products
Series illustration (not a photo of this item): 6410
You are viewing6410
€8.54baseline for the price comparison

Everything the number specifies matches: series 64, 50 × 130 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters.

  • Series illustration (not a photo of this item): 64106410This bearingno brand50 × 130 × 31available to order€8.54you are here
  • Series illustration (not a photo of this item): 64106410CT50 × 130 × 31469 pcs€6.39−€2.15Request a quote
  • Photo: 64106410Z&S50 × 130 × 31available to order€15.21+€6.67Request a quote
  • Series illustration (not a photo of this item): 64106410KG50 × 130 × 31available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 64106410NKE50 × 130 × 31available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€8.54).
02

Details

what this bearing is, questions

About the bearing

D 130d 50B 31
d×D×Bsize 50 × 130 × 31mm

Deep groove ball bearing 6410. Under GOST the same bearing is designated 410.

Frequently asked questions

What is 410?

It is the same bearing under GOST 3189-89: 410 corresponds to the ISO base 6410. Size 50 × 130 × 31 mm, a full equivalent of 6410.

Will 6410 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet