+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6307 2RS: ⌀35 × ⌀80 × 21 mm6307 2RS2RS
Fig. 1: 6307 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6307 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing 6307 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
15 exact, 48 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
21 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
01

Equivalents

the same size 35 × 80 × 21 from other brands

69 products
Series illustration (not a photo of this item): 6307 2RS
You are viewing6307 2RS

Everything the number specifies matches: series 63, 35 × 80 × 21 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters.
02

Details

what this bearing is, questions

About the bearing

D 80d 35B 21
d×D×Bsize 35 × 80 × 21mm

Deep groove ball bearing 6307-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180307.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180307?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0307 corresponds to the ISO base 6307. Size 35 × 80 × 21 mm, a full equivalent of 6307-2RS.

Will 6307 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet