+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6202 ZZ NR: ⌀15 × ⌀35 × 11 mm⌀35⌀15116202 ZZ NRZZ
Fig. 1: 6202 ZZ NR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6202 ZZ NR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing 6202 ZZ NR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 95 approximate
d
15 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
11 mm
Width BRing width. Source: supplier data
Seal
ZZshields, both sides
Clearance
normal clearance
01

Equivalents

the same size 15 × 35 × 11 from other brands

98 products
Cross-section drawing to size: Deep groove ball, 15 × 35 × 11 mm
You are viewing6202 ZZ NR

Everything the number specifies matches: series 62, 15 × 35 × 11 mm, metal shields on both sides, NR, normal clearance, special design.

  • Cross-section drawing to size: Deep groove ball, 15 × 35 × 11 mm6202 ZZ NRThis bearingno brand15 × 35 × 11available to orderon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 15 × 35 × 11 mm6202 2ZNRNSK15 × 35 × 11available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 15 × 35 × 11 mm6202-2ZNRSKF15 × 35 × 11available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 35d 15B 11
d×D×Bsize 15 × 35 × 11mm

Deep groove ball bearing 6202-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80202.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80202?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0202 corresponds to the ISO base 6202. Size 15 × 35 × 11 mm, a full equivalent of 6202-ZZ.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet