+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3310 2RS: ⌀50 × ⌀110 × 44.4 mm⌀110⌀5044.43310 2RS2RS
Fig. 1: 3310 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3310 2RS

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing 3310 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 10 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
44.4 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
01

Equivalents

the same size 50 × 110 × 44.4 from other brands

13 products
Series illustration (not a photo of this item): 3310 2RS
You are viewing3310 2RS

Everything the number specifies matches: series 33, 50 × 110 × 44.4 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle.

  • Series illustration (not a photo of this item): 3310 2RS3310 2RSThis bearingno brand50 × 110 × 44.4available to orderon requestyou are here
  • Series illustration (not a photo of this item): 3310 2RS3310 2RSCT50 × 110 × 44.4135 pcs€14.28Request a quote
  • Photo: 3310 2RS3310 2RSZ&S50 × 110 × 44.4available to order€39.29Request a quote
02

Details

what this bearing is, questions

About the bearing

D 110d 50B 44.4
d×D×Bsize 50 × 110 × 44.4mm

Angular contact ball bearing 3310-2RS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet