+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3308 2RS: ⌀40 × ⌀90 × 36.5 mm⌀90⌀4036.53308 2RS2RS
Fig. 1: 3308 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3308 2RS

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing 3308 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 11 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
36.5 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
01

Equivalents

the same size 40 × 90 × 36.5 from other brands

14 products
Series illustration (not a photo of this item): 3308 2RS
You are viewing3308 2RS

Everything the number specifies matches: series 33, 40 × 90 × 36.5 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle.

  • Series illustration (not a photo of this item): 3308 2RS3308 2RSThis bearingno brand40 × 90 × 36.5available to orderon requestyou are here
  • Series illustration (not a photo of this item): 3308 2RS3308 2RSCT40 × 90 × 36.556 pcs€6.80Request a quote
  • Photo: 3308 2RS3308 2RSZ&S40 × 90 × 36.5available to order€17.59Request a quote
02

Details

what this bearing is, questions

About the bearing

D 90d 40B 36.5
d×D×Bsize 40 × 90 × 36.5mm

Angular contact ball bearing 3308-2RS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet