+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 31308: ⌀40 × ⌀90 × 25.25 mm⌀90⌀40T 25.25α31308
Fig. 1: 31308, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 31308

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing 31308

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 14 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
T
25.25 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
01

Equivalents

the same size 40 × 90 × 25.25 from other brands

21 products
Cross-section drawing to size: Tapered roller, 40 × 90 × T 25.25 mm
You are viewing31308

Everything the number specifies matches: series 313, 40 × 90 mm, ordinary steel, design without special letters.

  • Cross-section drawing to size: Tapered roller, 40 × 90 × T 25.25 mm31308This bearingno brand40 × 90 × ?available to orderon requestyou are here
  • Cross-section drawing to size: Tapered roller, 40 × 90 × T 25.25 mm31308CT40 × 90 × ?22 pcs€3.61Request a quote
  • Cross-section drawing to size: Tapered roller, 40 × 90 × T 25.25 mm31308NTE40 × 90 × ?194 pcs€4.92Request a quote
  • Cross-section drawing to size: Tapered roller, 40 × 90 × T 25.25 mm27308 (31308)CT40 × 90 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 40 × 90 × 25.25mm

Tapered roller bearing 31308. Under GOST the same bearing is designated 27308.

Frequently asked questions

What is 27308?

It is the same bearing under GOST 3189-89: 27308 corresponds to the ISO base 31308. Size 40 × 90 × 25.25 mm, a full equivalent of 31308.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet